DP83869HM: Connecting RGMII signals to Ethernet Switch from Ethernet PHY Chip

Harikrishnan Thangamani

Prodigy 60 points

Part Number: DP83869HM

Tool/software:

Hi Everyone,

Greetings for the day.

I want to switch the MDI Signals (1Gbps) from ORIN NX to multiple devices lets say 5 channel.

ORIN NX has 1 No of 1Gbps Ethernet Interface.

I have one concept in mind. Please check the feasibility of implementing the same.

Regards,

Harikrishnan T

6 months ago

0 Harikrishnan Thangamani 6 months ago

Prodigy 60 points

Please propose solutions which was already implemented or any switch you do have in mind.

0 Gerome Cacho 6 months ago in reply to Harikrishnan Thangamani

TI__Mastermind 40275 points

Hello Harikrishnan,

For my understanding, you want to provide the RGMII to the Ethernet Switch, but then have that switch echo the traffic out to all five ports? If so, this seems more of a switch application which that vendor would be able to assist with. TI only is a vendor for Ethernet PHYs.

Sincerely,

Gerome

Interface

Interface forum

DP83869HM: Connecting RGMII signals to Ethernet Switch from Ethernet PHY Chip