DP83867E: DP83867ERGZR

RANGA SWAMY K

Part Number: DP83867E

Tool/software:

Dear TI Technical Support Team,

We want to configure DP83867ERGZR part o GigE, hence could you share the sequence of register's and its values needed to configure during power-up.

Regards

Ranga

+1 Evan Mayhew 4 months ago

Hi Ranga,

This can be configured through straps, without register access:

RX_CTRL = mode 3
LED_1 = mode 1 or 2 (depending if RGMII clock skew is required)

The corresponding registers are:

0x0[12] = '1' (enable auto-neg)
0x9[9:8] = '11' (enable Gigabit auto-neg advertisements)

Please let me know if you observe any issues.

Thank you,
Evan

0 RANGA SWAMY K 4 months ago in reply to Evan Mayhew

Hello Evan,

Thank You for your inputs, it is working now.

Regards

Ranga

Interface forum