• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 63 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD6F002-Q1: Protection Limits for Failure Analysis

Attila Molnár
Prodigy 80 points
Part Number: TPD6F002-Q1

Tool/software:

Dear Expert,

We are currently performing a failure effect analysis for our new design, and I would appreciate your guidance regarding the TPD6F002-Q1.

Specifically, we are evaluating the impact of a signal shorting to GND or VCC (5V). The signals in question are protected by the TPD6F002-Q1 device.

I have reviewed the datasheet but was unable to find clear answers to the following:

  1. What is the maximum allowable current or power dissipation on a single channel (e.g., across a 100-ohm resistor)?

  2. What is the maximum total power dissipation for the entire device or package?

Your assistance with this data would be greatly appreciated.
I look forward to your response.

Best regards,
Attila

  • 0
    TI__Expert 8120 points

    Hi Attila, 

    The max power dissipation is roughly 830mW. I am not entirely sure the allowable current on a single channel, but I can look into it for you. I know for our ESD diodes, the max forward current is between 100mA-200mA depending on size for DC. 

    Best,

    McKenzie