TUSB1021-Q1: TUSB1021-Q1

CHUAN MUN EI

Prodigy 20 points

Part Number: TUSB1021-Q1

Tool/software:

Hi TI design support,

I'm looking for CAD library in Altium format circuit symbol and footprint for TUSB1021-Q1

May I know able to get it here?

By the way, is this device able to work as host/device for USB C?

best regards

Mun Ei

over 1 year ago

0 Vishesh Pithadiya over 1 year ago

TI__Guru 58496 points

Hi Mun Ei,

The CAD symbol can be found here: www.ti.com/.../TUSB1021-Q1

This device works as a redriver, meaning it is bale to take in a loss signal and boost it for extended reach. The TUSB1021-Q1cannot be used as a host or device.

0 CHUAN MUN EI over 1 year ago in reply to Vishesh Pithadiya

Prodigy 20 points

Dear Vishesh,

Thanks for your response!

The CAD symbols and footprint doesn't show in the web, I may request the engineer to create it

By the way, the redriver is only work as signaling booster when the signal is weak/loss?

regards

+1 Vishesh Pithadiya over 1 year ago in reply to CHUAN MUN EI

TI__Guru 58496 points

CHUAN MUN EI said:
By the way, the redriver is only work as signaling booster when the signal is weak/loss?

The redriver will equalize what it is programmed to and this value will be constant. If we boost an already good signal we may overcompensate the signal. This is why we must tune the redriver to compensate for the loss in that path and not much more past that.

Interface

Interface forum

TUSB1021-Q1: TUSB1021-Q1