• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 93 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1043A-Q1: Request "CAN FD controller conformance test"

Luke Park
Prodigy 675 points
Part Number: TCAN1043A-Q1

Tool/software:

Hi, TRX team

One of my key custoemer, BHEVS is requested these material from OEM and need your prompt feedback.

“CAN FD controller conformance test”

The “Authentication on CAN Conformance” CAN protocol conformance test consists of three test groups:

  1. ISO 16845 conformance test
  2. Resister interface test
  3. Robustness test

I've found this link, but I'm NOT sure this link might include there three items requested. Thanks.

https://e2e.ti.com/support/interface-group/interface---internal/f/interface---internal-forum/1391679/faq-tcan1044a-q1-can-lin-and-sbc-emc-and-compliance-reports?tisearch=e2e-sitesearch&keymatch=%20user%3A119655# 

  • 0
    TI__Genius 13492 points

    Hi Luke,

    That E2E post does point to the correct documentation for the ISO test. However, I am not familiar with the second and third test you mentioned. The TCAN1043A documents on Seismic do provide further testing details which will likely satisfy your customer. 

    Best,

    Ethan