• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 67 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS160PT801:   DS160PT801：DS160PT801：How to configure refclkout through EEPROM

Daisy Yang
Prodigy 20 points
Part Number: DS160PT801

Tool/software:

How to configure refclkout through EEPROM？

After burning with the attached firmware, there is no output of refclkout in DS160PT801. Please provide the following modification method。

The firmware is as follows

[Redacted]

  • 0
    TI__Mastermind 20901 points

    Hello Daisy,

    Due to the restricted nature of this request, please allow us to support you via E2E private messages. Please accept my E2E friend request so that I can assist you.

    I have redacted the EEPROM file you've posted, but will continue to reference it in our private message conversation.

    Best,
    David