TCA9517-Q1: TCA9517DGKRQ1 EN pin pullup resistor value

Andras Trutz

Prodigy 10 points

Part Number: TCA9517-Q1

Tool/software:

We use TCA9517DGKRQ1 in our design.

The datasheet mentions that there is an internal pullup resistor on the EN pin.

Can you please tell me the value of this internal pullup resistor? I did not find this in the datasheet

thank you

4 months ago

0 Clemens Ladisch 4 months ago

Guru 317370 points

The specified input leakage current of the EN pin is less than 30 µA, so the resistor is more than 168 kΩ.

0 Jack Guan 4 months ago

TI__Mastermind 41236 points

Hi Andras,

Today is a TI holiday- responses will be delayed and the team will get back to you as soon as possible.

Regards,

Jack

+1 Tyler Townsend 4 months ago

TI__Mastermind 48308 points

Hi Andras,

I agree with Clemens here.

The case where VCC = 5.25V. The input leakage is max -30 uA coming out of the pin when the input voltage VI = 0.2 V.

(5.25 V - 0.2 V) / 30 uA = 168.33 kohm

The resistance must be >= 168.33 kohm. A typical application might use an external PU resistor (10k) for additional PU strength.

Regards,

Tyler

0 Andras Trutz 4 months ago in reply to Tyler Townsend

Prodigy 10 points

Thank you for your answer.

I would like to disable the repeater at startup and after power on of the system MCU will enable the repeater. So I would like to place a pulldown resistor on EN pin. 4,7kOhm seems to be a good choice.

thanks,

Andras

0 Tyler Townsend 4 months ago in reply to Andras Trutz

TI__Mastermind 48308 points

Hi Andras,

4.7kohm sounds good to me.

Please let me know if you have any further questions.

Regards,

Tyler

Interface

Interface forum

TCA9517-Q1: TCA9517DGKRQ1 EN pin pullup resistor value