• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB3410: SPI to USB Bridge Options

Pete Sampson
Intellectual 440 points
Part Number: TUSB3410


Tool/software:

Please ignore the Part Number for this post, I'm looking for a part number but a number was required to post in this forum. I originally posted in the ADC forum and they sent me here.

Tool/software:

Looking to use the ADS7953SBDBT and interface it with it over USB in a product. What's the easiest way to do that in terms of a chipset I can put on a PCBA for linux without requiring drivers for linux? I had been considering USB to SPI bridge using the FT2232H-56Q-TRAY, but figured TI has a USB to SPI chip or an easier way to implement it.

FT2232H-56Q-TRAY:

https://www.digikey.com/en/products/detail/ftdi-future-technology-devices-international-ltd/FT2232H-56Q-TRAY/5994773?s=N4IgTCBcDaIGIBUxgMxgBIFoCsA2AipggEoCCAmiALoC%2BQA

  • +1
    TI__Mastermind 39975 points

    Hi Pete,

    Unfortunately, we don't have any devices that support a USB to SPI bridge. I personally don't have any experience with this device, so I can't say I know of any other solutions for communicating with this device outside of a USB to SPI bridge. Sorry about that.

    Thanks,

    Ryan