DS280DF810: Schematic review

Hi Vayne,

We will review the schematic and get back to you next week.

Please also see this other thread on -KR signaling.  I would like to confirm that in this application, disabling link training is acceptable.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1513866/ds280df810-ds280df810-and-kr---sfi-conversion/5820883#5820883

Thanks,

Drew

Hi Miller,

Well, thank you! Looking forward to your reply.

Hi Vayne,

Can you confirm that disabling link training is acceptable for this application?

I'm working on reviewing the schematic.

Thanks,

Drew

Hi Drew,

By the way, are there any other Part number recommended for training support?

Hi Vayne,

We would recommend a linear redriver, DS280BR820 or DS280MB810, if link training is required.

Thanks,

Drew

Hi Drew,

OK.I have confirmed with the customer that it is acceptable not to support training. 

Please help review the schematic diagram, thank you~

Hi Vayne,

Thanks for confirming this and apologies for the delay, we are still reviewing the schematic.

Thanks,
Drew

Hi Drew,

How about the sch review?

thanks~

Hi Drew

Thank you for your support.