TPD4E001: Using it for I2C lines

deepak naiknavare

Part Number: TPD4E001
Other Parts Discussed in Thread: TSD05,

Tool/software:

I have decided to use this IC for 4 lines of I2C interface connecting to external LEB board (400khZ).

SDA, SCK, RESET and INT.

Do you see any issue to use it for I2C application?

0 Clemens Ladisch 10 months ago

Guru 321790 points

This is no problem. I²C is a very slow protocol and could tolerate a much larger capactiance, e.g., TSD05.

0 McKenzie Eaker 10 months ago

Hi,

Clemens is correct, there is no problem with using TPD4E001 for this application.

Best,

McKenzie

Interface forum