• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 253 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TD510E: What is the Roll-Off Factor used in 10Base-T1L Ethernet?

André Krummenacher
Prodigy 30 points

Part Number: DP83TD510E

Tool/software:

Hi TI-Team

I can't seem to find this information anywhere in the 802.3cg IEEE Standard. What Roll-Off factor is beeing used for the raised cosine pulse shaping? Assuming it is raised cosine, which is not mentioned in the standard either. I need this information to verify signal integrity with my channel model. Thanks!

  • 0
    TI__Expert 8225 points

    Hi Andre, 

    Thank you for your query. I am not sure about the exact roll-off factor value, but I am trying to contact people who may be privy to this information within my team. Kindly allow me until the end of the week to get back to you. I will reply back on this thread when I have something. Thank you for your patience. 

    Best,

    Vivaan