TUSB1310A: USB3.2 PHY device

Ishwar Sharma

Part Number: TUSB1310A

Tool/software:

Hi Team,

We are looking to use USB3.2 PHY device with PIPE interface. There is TUSB1310A device, but it is looking NRND device. Could you please suggest any substitute device for TUSB1310A device or any other new device for this application.

Best regards

4 months ago

0 Brian Zhou 4 months ago

TI__Guru*** 147925 points

Hi Ishwar:

this is the only USb3 PHY device we have.

Best

Brian

0 Ishwar Sharma 4 months ago in reply to Brian Zhou

Prodigy 160 points

Hi Brian

Thanks for update.

Is there any specific reason for NRND status for this device now. By when this device will be available.

Best regards

0 Brian Zhou 4 months ago in reply to Ishwar Sharma

TI__Guru*** 147925 points

There is power on reset issue for this device, that's why it's on NRND.

Best

Brian

0 Ishwar Sharma 4 months ago in reply to Brian Zhou

Prodigy 160 points

Is there any Work around for this power on reset issue.

Is there any way to connect this device with USB Type C connector.

Best regards

0 Brian Zhou 4 months ago in reply to Ishwar Sharma

TI__Guru*** 147925 points

the workaround is not solid, may still has issue 1-2%

yes, it still can connect to type-C port with CC controller or PD controller.

Best

Brian

Interface

Interface forum

TUSB1310A: USB3.2 PHY device