DS125BR111: Is it okay to swap the positive and negative terminals on the DS125BR111?

masashi nozawa

Part Number: DS125BR111

Tool/software:

Hi,

I want to swap the positive and negative terminals to simplify the connection between the DS125BR111 and the connector. Is this possible?

For example,

[Dev1"+"] ---- [DS125BR111 "-"] ---- [Dev2"+"]

[Dev1"-"] ---- [DS125BR111 "+"] ---- [Dev2"-"]

regards,

2 months ago

0 Undrea Fields 2 months ago

TI__Genius 10880 points

PCI Express has support for polarity swapping so it is ok to swap +/- for routing reasons.

Regards,

Undrea

0 masashi nozawa 2 months ago in reply to Undrea Fields

Prodigy 10 points

Hi, Undrea

Thank you for your reply.
But we would like to know if it is ok to replace it on the DS125BR111 side.
From your answer, I can predict that there won't be a problem, but I would like a clear answer.

regards,

0 Undrea Fields 2 months ago in reply to masashi nozawa

TI__Genius 10880 points

Hi,

There is nothing on the DS125BR111 to prevent swapping polarity as well. Thanks!

Regards,

Undrea

0 masashi nozawa 2 months ago in reply to Undrea Fields

Prodigy 10 points

Hi Undrea,

Thank you it helps a lot.

regards,

0 Undrea Fields 2 months ago in reply to masashi nozawa

TI__Genius 10880 points

No problem, I'll close this thread for now. Feel free to open if any other questions come up.

Regards,

Undrea

Interface

Interface forum

DS125BR111: Is it okay to swap the positive and negative terminals on the DS125BR111?