usb set up in Dvm 365

saheel ahamed

Prodigy 50 points

hi,

i am using dvm365 Evm board,i want to check usb is working fine or not

usb is conected vis proc filesystem where will be the data when usb is hot plugged

in to the hardware since i don't find /dev/sda1 or sda2 entries in my kernel version

2.6.18 ,i can see /proc/bus/usb/---devices and 001

any idea please let me know

thanks and regards

Saheel

over 16 years ago

0 saheel ahamed over 16 years ago

Prodigy 50 points

this problem got Solved,i just changed jumper and it worked,

but how to determine at wat speed usb is copying data .?

0 Wes Ray over 16 years ago in reply to saheel ahamed

TI__Intellectual 2995 points

There are several ways you could do this. Typically people use an external USB analyzer to get the throughput or you can time it using your SW. If you are a device connected to a PC, you may be able to find a PC application that shows throughput as well.

Interface

Interface forum

usb set up in Dvm 365