• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 353 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MAX3232E: MAX3232E

Hareesh p
Prodigy 120 points

Part Number: MAX3232E
Other Parts Discussed in Thread: MAX232

Tool/software:

Hi All,

We are using MAX3232E in our design for UART-to-RS232 conversion. We need to provide flow control signals(CTS & RTS) from MCU to RS232 connector. Which signal i need to use for this? 

  • 0
    TI__Prodigy 430 points

    Hello Hareesh, 

    To provide flow control signals from MCU to RS232, you can pick from the following signals listed. CTS/RTS are similar to TXD/RXD in the sense that they are another transmit/receiver pair. Therefore, for an example, you can tie CTS and RTS to RIN2 and DOUT2. 

    Best, 
    Leah Jones 

  • 0
    Prodigy 120 points

    Hi Jones,

    Thanks for the confirmation. 

    One more doubt regarding the connection you have mentioned, 

    RIN2 & DOUT2 are the level shifted RS232 signals. So, from MCU side i will have to connect as per the below diagram

    MCU       MAX232
    CTS----> DIN2(PIN_10)
    RTS----> ROUT2(PIN_9)

    MAX232       Remote RS232 system

    RIN2 -------> CTS (Remote RS232 system)

    DOUT2 ----> RTS (Remote RS232 system) 

    Kindly share your feedback.

  • 0 in reply to Hareesh p
    TI__Prodigy 430 points

    Looks good! Let me know if you have any questions! Slight smile