DS160PT801: flash EEPROM

Jeff YANG

Mastermind 8100 points

Part Number: DS160PT801
Other Parts Discussed in Thread: USB2ANY,

Tool/software:

Hi,

We want provide one set flash tool for manufature side to flash the EEPROM.

Using USB2ANY via SigCon GUI to flash the .hex file is possible?

We just need connect USB2ANY SCL/SDA to EEPROM?

Or anything need to noticed?

Thanks!

Jeff

3 months ago

+1 Gregory Kobyakov 3 months ago

TI__Expert 5640 points

Hi Jeff,

It is possible to flash the EEPROM using SigCon Architect. Otherwise, we would recommend applying an EEPROM to the device using Flash Center or something comparable.

Best regards,

Greg

0 Jeff YANG 3 months ago in reply to Gregory Kobyakov

Mastermind 8100 points

Hi Greg,

Got it, flash center only need PC + USB cable to flash the EERPROM, right?

Thank you

Jeff

0 Gregory Kobyakov 3 months ago in reply to Jeff YANG

TI__Expert 5640 points

Hi Jeff,

A host adapter, such as an Aardvark I2C/SPI Host Adapter is generally required to connect your PC to the board to flash the EEPROM. Are you using the DS160PT801 evaluation module board to flash the device?

Best regards,

Greg

0 Jeff YANG 3 months ago in reply to Gregory Kobyakov

Mastermind 8100 points

Hi Greg,

Yes, We using the DS160PT801 evaluation module board to flash the EEPROM.

Jeff

+1 Gregory Kobyakov 3 months ago in reply to Jeff YANG

TI__Expert 5640 points

Hi Jeff,

I reviewed the device information, and the DS160PT801 SigCon GUI profile does support loading EEPROM .hex files. This can also be done via Aardvark I2C/SPI Host Adapter and Flash Center. I sincerely apologize for any confusion.

Best regards,

Greg

0 Jeff YANG 3 months ago in reply to Gregory Kobyakov

Mastermind 8100 points

Hi Greg,

Great, that it good news.

Thanks!

Jeff

Interface

Interface forum

DS160PT801: flash EEPROM