If you want an MCU/MCU family added to the TI System Basis Chip (SBC) to MCU Compatibility Tool to see what TI CAN/LIN SBCs can support it, please copy the template below, fill in the required info, and post it as an E2E question titled “SBC to MCU Compatibility Request” and tag the "TCAN2845-Q1" as the part number (even if this is not the SBC you will end up using).
MCU Family:
MCU part number (if applicable):
MCU manufacturer:
Link to the MCU datasheet:
Supply voltage:
Maximum supply current needed:
Protocol(s) needed (CAN, LIN, CAN FD, CAN SIC, etc.):
