ESD1LIN24-Q1: S parameter model is required

Shunsuke Yamamoto

Genius 9211 points

Part Number: ESD1LIN24-Q1

Hi team,

May I know if this device has s parameter model? I would like to simulate the s parameter of this device.

Best regards,

Shunsuke Yamamoto

2 months ago

0 Bryan Rodriguez de San Miguel 2 months ago

TI__Intellectual 2640 points

Hi Shunsuke,

Let me know if you need the data.

Best,

Bryan

0 Shunsuke Yamamoto 2 months ago in reply to Bryan Rodriguez de San Miguel

TI__Genius 9211 points

Hi Bryan,

Thank you for the data of S21. Could you please simulate the S11, S12 and S22?

Best regards,

Shunsuke Yamamoto

0 McKenzie Eaker 2 months ago in reply to Shunsuke Yamamoto

TI__Genius 10550 points

Hi Yamamoto-san,

Please see image for all s-parameters.

Best,

McKenzie

0 Shunsuke Yamamoto 2 months ago in reply to McKenzie Eaker

TI__Genius 9211 points

Hi McKenzie-san,

Thank you so much for the simulations of S11, S12, S21, and S22! It is really helpful for persuade customers to use our device.

By the way, may I know if you have the raw data of these simulations?

Best regards,

Shunsuke Yamamoto

+1 McKenzie Eaker 2 months ago in reply to Shunsuke Yamamoto

TI__Genius 10550 points

Hi Yamamoto-san,

Please see the attached file for the raw data. Also, just to note, this was a fully simulated model so no actual, lab measurements were collected for this.

Best,

McKenzie

ESD1LIN24_sparamdata.csv

Interface

Interface forum

ESD1LIN24-Q1: S parameter model is required