• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 72 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THVD1429: R pin behavior during Power on

ttd
Mastermind 8840 points
Part Number: THVD1429


Dear Technical Support Team,

Which behavior does R pin output High or Low or Hiz or unkonwn during Power on?

Best Regards,,

ttd

  • 0
    TI__Guru* 77791 points

    Hi ttd,

    The device should be high-z.

    We technically call these devices hot insertion capable so as long as the RE# pin isn't biased low during the power up then we should expect R to be high-Z.

    -Bobby