• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83822I: Inquiry About EtherCAT Compliance Test

Johnson David
Prodigy 160 points

Part Number: DP83822I

Dear Ti

We are currently using the DP83822IRHBR device and would like to perform an EtherCAT compliance test to verify the signal quality of our circuit.

We would like to ask whether there is any documentation available that describes the test method and overall procedure for conducting the EtherCAT compliance test.

In addition, we understand that a separate test mode and corresponding firmware or code may be required to perform this test. Could you please let us know if TI provides any reference test code for this purpose?

If such test code is not available, we would appreciate your guidance on how to generate or implement the required code to enable the EtherCAT compliance test.

Thank you very much for your support.

Best regards,