TPD2E2U06: Regarding coatings for moisture-proof materials, etc.

shirakata.yuto

Prodigy 130 points

Part Number: TPD2E2U06

Dear Engineer,

Would it be acceptable to apply a coating such as a moisture-proof material to the parts?

>TPD2E2U06DCKR

Best regards,

Yuto

1 month ago

0 Bryan Rodriguez de San Miguel 1 month ago

TI__Expert 3420 points

Hi,

How are you applying this? This is applying a coating after purchasing units right?

Best,

Bryan

0 shirakata.yuto 1 month ago in reply to Bryan Rodriguez de San Miguel

Prodigy 130 points

HI,Bryan

Thank you for your reply.

Yes, we apply the coating after purchase. Will this interfere with IC operation? Please let me know if there are any precautions.

Best regards,

Yuto

+1 Bryan Rodriguez de San Miguel 1 month ago in reply to shirakata.yuto

TI__Expert 3420 points

Hi,

Will the coating be applied on the molding package? If yes, the coating on molding package will not affect the electrical performance, but it will affect the thermal performance.

Let me know if you need anything else.

Best,

Bryan

0 shirakata.yuto 1 month ago in reply to Bryan Rodriguez de San Miguel

Prodigy 130 points

Hi,

Yes, thank you for your response. I'll consult you again if anything else comes up.

Best regards,

Yuto

Interface

Interface forum

TPD2E2U06: Regarding coatings for moisture-proof materials, etc.