TLK100 | Problems with registers 0x0002 and 0x0003

Nate

Other Parts Discussed in Thread: TLK100

Team,

Is the datasheet info correct on page 46 regarding registers 0x0002 and 0x0003? A customer expected to read out 0x2000 and 0xA201, respectively, but instead read out 0x4000 and 0x5201. All other registers on the board appear to be working perfectly.

Any ideas on what's going on?

Thanks.

over 13 years ago

0 Oren Shalita over 13 years ago

TI__Intellectual 1720 points

Hi,

These registers are constant values per manufacturer and per part (Standard Manufacturer Values).

Unfortanately we had a mistake in the Data Sheet and the correct values are indeed as the customer read:

Reg 0x2 value: 4000(h)

Reg 0x3 value: 5201(h)

We will add them to the fixes list for the next revision of the TLK100 Data Sheet,

Thanks & Regards,

Oren

0 Nate over 13 years ago in reply to Oren Shalita

TI__Genius 11680 points

Thanks!

Interface

Interface forum

TLK100 | Problems with registers 0x0002 and 0x0003