• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 46 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ESDS302: Design Inquiry

Abhishek Manoj
Intellectual 835 points

Part Number: ESDS302

Hi Team,

For the ESD diode ESDS302DBVR, can i connect the USB 2.0 signal P and N on any of the I/O pins or there is any recommendation for connection the P and N signal to a particular I/O pin.

Please confirm the above.

 

Regards,

Abhishek