[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB Hubs E2E Page
Listed below are a variety of resources to assist with the implementation USB Hubs!
USB Hubs Training:
USB Hubs Collateral:
- 4-port USB 3.0 Hub Reference Design
- 2-port USB 3.0 Hub Reference Design
- Transitioning from a USB 3.1 Hub to a USB 3.2 Hub
- Automotive Dual-Port 2.4A USB 2.0 Hub with Short-to-Battery Reference Design
- OMAP4 Standard USB Usage
- TUSB4010BI-Q1 Functional Safety
- TUSB8040A Design Guide
- TUSB8041A1 Design Guide
- Using TUSBXXXX EEPROM Programmer
Frequently Asked Questions (FAQs):
- Differences between the TUSB804x USB 3.0 hub family
- How to put a TI USB Hub into programming mode
- USB hub power on and reset timings
- USB 3.x Compliance Testing on USB hubs
- USB 2.0 Hub HS Eye Diagram Testing
- USB Hub Downstream Port Debugging Guide
- USB 3.0 Hub not Enumerating
- USB1.1 & USB 2.0 Hub FAQs
- TUSB4041I Schematic Checklist
- TUSB8041A Schematic Checklist
- TUSB4020B Schematic Checklist
- TUSB2046B Schematic Checklist
