[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB2.0 E2E Page
Listed below are a variety of resources to assist with the implementation of USB2.0 & eUSB2!
USB2.0 Training:
- What is a USB Redriver?
- Layout Basics for USB Designs
- What is USB BC1.2?
- What is the USB 2.0 high-speed detection handshake?
- USB2.0 Redriver Configuration
USB2.0 Collateral:
- High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A)
- TUSB21xx High-Speed Signal Quality Test Modes
- TUSB211 to TUSB216I Transition Guide
- TUSB21xx High-Speed Signal Quality Test Modes
- TUSB2XX implementation guide
- TUSB212 Schematic Checklist
- TUSB211 to TUSB212 Changes
- TUSB217-Q1 Configuration Guidelines
- USB 2.0 Compliance Checklist
- How to Implement an isolated USB 2.0, Type-C DRP
- Transitioning from USB 2.0 OTG to USB Type-C
- USB On-The-GO (OTG) Brochure
USB 2.0 Frequently Asked Questions (FAQs):
- [FAQ] TUSB211A: My USB2 Redriver is not boosting when enabled during testing.
- [FAQ] TUSB211A: How does a USB2 redriver boost the signal that passes through it?
- [FAQ] TUSB211A: Why do some USB2 redrivers not need to be directly integrated?
- [FAQ] TUSB211A: Why does the USB 2.0 redriver not appear to work when taking eye-diagrams?
- [FAQ] TUSB216I: How do you create a system with a 10 meter passive cable using a USB2 redriver?
- [FAQ] Schematic Review Suggestions - TUSB211 as an example
- [FAQ] TUSB212: Why does USB 2 (HS) stop working when multiple USB 2 redrivers are enabled?
