Interface

Interface forum

State Resolved
Locked Locked
Replies 4 replies
Subscribers 34 subscribers
Views 88 views
Users 0 members are here

Support feedback

Options

Options

Related

TUSB522P: Review Request for TUSB522P Redriver schematic and Layout suggestion point

Danilo A.

Mastermind 34570 points

Part Number: TUSB522P

Hi Team,

Posting on behalf of our customer.

I'll share this E2E post with our customer so he can reply when needed.

The TUSB522P redriver schematic is on Page 9. The redriver input is connected to the FPGA side (Page 6), and the redriver output is connected to the USB Type-C connector (Page 7).

Could you please review the schematic and let me know if you identify any issues or recommended changes? Additionally, I would appreciate any layout suggestions or best-practice recommendations for signal integrity and routing.

Our customer will shar the design files offline.

Regards,

Danilo

0 Vishesh Pithadiya 3 months ago

TI__Guru 63146 points

Hi Danilo,

Please accept my friend request. You can share the schematic over private message.

0 Danilo A. 3 months ago in reply to Vishesh Pithadiya

TI__Mastermind 34570 points

Hi Vishesh,

Thank you for your quick response.

I've asked the customer to reply to this post so he can continue the discussion with you,

Regards,

Danilo

0 Vishesh Pithadiya 3 months ago in reply to Danilo A.

TI__Guru 63146 points

Hi Danilo,

Understood, looking forward to the customers response.

+1 Vishesh Pithadiya 2 months ago in reply to Vishesh Pithadiya

TI__Guru 63146 points

Hello,

Closing thread due to inactivity. If you have any follow-up questions or concerns, feel free to reply.