DS160PT801: IBIS Model Requirement

Veda Samhitha

Part Number: DS160PT801

Greetings,
I am currently using DS160PT801ACBT for PCIe Retimer in our design. I require its IBIS AMI or IBIS model for performing the Signal Intergity checks.

Kindly please provide me with the model.
Hoping an early response.
Thank you
Regards
VEDA

7 days ago

0 Charles 7 days ago

TI__Expert 5542 points

Hi Veda,

Please request for secure resource access. The IBIS-AMI model is located there.

Best,

Charles

0 Veda Samhitha 7 days ago

Prodigy 50 points

Hi Charles,
Thank you for the info. I have requested it.

0 Veda Samhitha 7 days ago in reply to Veda Samhitha

Prodigy 50 points

Hi Charles,
I have raised the request for secure access as you have recommended. But I have not got any response back from there. Can you please support or provide us with the model, since time is a little critical for us.
Hope you understand.
Thank you

0 Charles 2 days ago in reply to Veda Samhitha

TI__Expert 5542 points

Hi Veda,

Sorry for the delay. You should have access now.

Best,

Charles

Interface

Interface forum

DS160PT801: IBIS Model Requirement