DS90UB971-Q1: DS90UB971-Q1 IBIS file

Blanche Yang

DS90UB971 is mounted adjacent to a second PCB in the same enclosure and need these models to assess inter-board coupling/desense risk before chamber testing.

3 months ago

0 Thomas Bejin 3 months ago

TI__Mastermind 28441 points

Hi Blanche,

Thanks for reaching out. Could you clarify what your question is here?

Best.

Thomas

0 Blanche Yang 3 months ago in reply to Thomas Bejin

Prodigy 10 points

Hi Thomas,

The harness that bridges serializer to deserializer is right next to another pcb. We want the ibis file so we can better characterize the risk since would want to run simulations to character source strength and how signals would propagate through the harness, etc.

+1 Ethan Woods 3 months ago in reply to Blanche Yang

TI__Expert 3520 points

Hi Blanche,

Could you send me an email about this so we can get you what you need? Since this is a public forum, we do not share information like this about our NDA parts.

Please reach out to me at e-woods@ti.com for further information.

Thank you,

Ethan Woods

0 Blanche Yang 3 months ago in reply to Ethan Woods

Prodigy 10 points

Hi Ethan,

I sent you an email!

Thanks,
Blanche

Interface

Interface forum

DS90UB971-Q1: DS90UB971-Q1 IBIS file