HD3SS3212: Switching configuration

Jeffrey Chung1

Part Number: HD3SS3212

Hi David Liu,

Customer is considering this deivce to reduce their board size using the switching configuration of DP 2-Lain and I2C/GPIO. Please check the file below and let me know if there are any issues. Also, please let me know if there is the internal coupling capacitor each signal line.

HD3SS3212 Switching Configuration.pdf

Regards,

2 months ago

0 Caroline Ormond 2 months ago

TI__Intellectual 1230 points

Hello Jeffrey,

Your schematic looks fine and should operate without any issues. You have 0.1uF capacitors on A0+/- pins, AC coupling caps on VCC, and a pull-down resistor on the enable pin.

Best,

Caroline

0 Jeffrey Chung1 2 months ago in reply to Caroline Ormond

Genius 3470 points

Hi Caroline,

Thank you for your feedback. I used the diagram of typical application in the datasheet to explain the customer's configuration, so other components you comment are remain on the diagram. One more thing, please let me know if there is the internal coupling capacitor each signal line.

Regards,

+1 Caroline Ormond 2 months ago in reply to Jeffrey Chung1

TI__Intellectual 1230 points

Hello Jeffrey,

There are capacitors inside the device but there are no coupling capacitors. Those need to be externally added.

Best,

Caroline

Interface

Interface forum

HD3SS3212: Switching configuration