Interface

Interface forum

State
Locked Locked
Replies 5 replies
Subscribers 35 subscribers
Views 807 views
Users 0 members are here

Support feedback

Options

Options

Related

about Nand tree test

Martin Sun

Prodigy 30 points

My customer is using PCI2250PCMG4. He wants to do Nand tree test, but there is not any information in its datasheet. So he wants to know TI's Nand tree configuration and the difference between TI's and Intel NAND tree structure. Please help answer the question, thanks.

over 13 years ago

0 Elias Villegas M. over 13 years ago

TI__Guru* 76130 points

Hello Martin,

The NAND tree mode is enabled by connecting pin GOZ# to ground.

Please provide an email and I can send you the tree mapping.

Regards.

0 Martin Sun over 13 years ago in reply to Elias Villegas M.

Prodigy 30 points

Here is my email: martin.sun@wpi-group.com. please send me the tree mapping. Many thanks.

0 Kurt Schmidt over 13 years ago in reply to Elias Villegas M.

TI__Genius 11145 points

Elias - I also have a need for this information. Can you please send it to k-schmidt@ti.com? Thanks!

0 James Welch over 13 years ago in reply to Kurt Schmidt

Prodigy 10 points

I also have need for this information. Please send it to james.welch@plexus.com. Thank you.

0 Michael Song over 13 years ago in reply to Elias Villegas M.

Prodigy 10 points

Hi Elias,

My customer is also using the PCI2250PCMG4. And they want to enable the NAND TREE test.

Can I have the tree mapping?

My email: msong@asset-intertech.com.