Part Number: DS560DF410EVM
Other Parts Discussed in Thread: DS560DF410
Hello TI team,
We recently purchased the DS560DF410 [and the DS560DF410EVM] through Mouser Korea (Please refer to the attached invoice ) for evaluation in our product development.
Our company, Uniqconn Inc., is a fabless semiconductor company based in Korea developing contactless interconnect solutions. We are evaluating the DS560DF410 as a PAM4 retimer in our signal chain, and we plan to control the device in standalone mode via I2C from our own host controller (not through the EVM/Latte environment in the final system).
To proceed, we would like to request access to the following:
- DS560DFXX0 Programmer's Guide (register map and I2C programming sequence)
- Latte framework installer and DS560 library updater (TI-DS560-Latte and TI-DS560Lib)
- ROM patch binary and the recommended patch loading sequence required for channel initialization during standalone I2C bring-up
Please let me know if there is a form or NDA process we need to complete. I can provide any additional company or project information as needed.
My myTI account is registered under my company email (sj.kim@uniqconn.com).
Thank you for your support.
Best regards,
SJ.kim
Director of Analog IC, Uniqconn Inc.
