Part Number: DP83826AI
I have developed a code for XMC4800 evaluation board which uses BCM5241XA1KMLG and it is working fine. Since it became absolute, I switched to DP83826A, and used the same working code, and added some additional code to configure DP83826A in accordance with the datasheet. However, no I am getting "INIT to PREOP failed! Error: read slave count. Commuication error 0x71f"
when I checked the slave state, I found it become INIT LNK_ERR LNK_ADD B for short time before it become INIT NO_COMM.
I can see the Activity LED changing the blinking rate with transition request and error, what possibly could be the issue here?
