TPD4E05U06: TVS for MIPI

Vignesh P

Part Number: TPD4E05U06

Hi Team,

We are planning to use the TPD4E05U06DQAR TVS diode for the MIPI signal lines (CSI-2, 4-lane) in our product. However, I noticed that MIPI is not explicitly listed under the recommended applications in its datasheet.

Could you confirm if this IC is suitable for MIPI interfaces in our application? If not, could you recommend a more appropriate alternative?

1 month ago

0 Bryan Rodriguez de San Miguel 1 month ago

TI__Expert 7050 points

Hi Vignesh,

Can you confirm the speed that you are using? I see that it can go up to 10Gbps.

Best,

Bryan

0 Vignesh P 1 month ago in reply to Bryan Rodriguez de San Miguel

Prodigy 50 points

Hi Bryan,

The MIPI speed we are using in our product is 1.5Gbps per lane.

+1 Bryan Rodriguez de San Miguel 1 month ago in reply to Vignesh P

TI__Expert 7050 points

Hi Vignesh,

Then I do not see a problem if you use this device with your product. All you need to confirm is that the VClamp is below the abs max ratings of the device you are using. I can support with that if you share your downstream IC.

Best,

Bryan

Interface

Interface forum

TPD4E05U06: TVS for MIPI