TCAN1046AV-Q1: Request for Design Verification – TCAN1046VDMTRQ1 CAN Transceiver

Nithin Raj S

Greetings,

We are currently working on the VCU design for our EV bike. In our design, we have used the TCAN1046VDMTRQ1 CAN transceiver IC.

We would like to request your support in reviewing and verifying the design implementation for this IC. Kindly let us know if the design is correct or if any modifications or recommendations are required before we proceed further.

Please let us know if you require the schematic or any additional design files for the verification.

Thank you, and we look forward to your feedback.

Screenshot 2026-07-27 101538.png

2 months ago

0 Michael Ikwuyum 2 months ago

TI__Guru* 81062 points

Hi Nithin,

Looks good overall. If not intentional, I would recommend 4.7 nF split cap similar to the data sheet's test condition, thanks.

Best Regards,

Michael.

0 Nithin Raj S 2 months ago

Prodigy 10 points

Hi Michael,

Thank you for your input. I appreciate your feedback.

Interface

Interface forum

TCAN1046AV-Q1: Request for Design Verification – TCAN1046VDMTRQ1 CAN Transceiver