This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Re : Clock source selection for tusb1310a

Other Parts Discussed in Thread: TUSB1310A

Hello Sir,

I am planning to use ECS-400-3X-TR Crystal as a clock source for tusb1310a. Its datasheet http://www.ecsxtal.com/store/pdf/CSM-3X.pdf says that its drive level is 100 uW. Please let me know if it is ok to use it and what is the drive level requirement of tusb1310a?

 

Regards,

Ashish

  • Hello Ashish,

    The crystal meets the general specifications.

    But also take in mind the jitter requirements for the clock source, you can find detailed information on Section 5.2 of the TUSB1310A datasheet.

    Regards.

    http://www.ti.com/lit/ds/symlink/tusb1310a.pdf