TCA39306: Required Technical parameters for MPN : TCA39306DCUR

Bill Tseng

Prodigy 150 points

Part Number: TCA39306

Hi Team

Could coule plrase help to provide output current for TCA39306DCUR , thank you very much.

15 days ago

0 Tyler Townsend 15 days ago

TI__Guru 65368 points

Hi Bill,

Bill Tseng said:
Could coule plrase help to provide output current for TCA39306DCUR , thank you very much.

This device is a passive level translator and does not have an output current.

The current passing through this device is dependent on the application - specifically the pull-up resistors chosen. What are your pull-up voltages and pull-up resistor selections?

Regards,

Tyler

0 Bill Tseng 14 days ago in reply to Tyler Townsend

Prodigy 150 points

Hi Tyler

As Shown in the image , this is our application.

VREF1 is 1V、VREF2 is 1.8V ， the resistor between VREF2 and EN is 200K ohm

0 Tyler Townsend 14 days ago in reply to Bill Tseng

TI__Guru 65368 points

Hi Bill,

At which point would you like to know the current measurement?

Also, the device is connected incorrectly. If you are level translating between 1V and 1.8V, you need to follow the application schematic

Regards,

Tyler

Interface

Interface forum

TCA39306: Required Technical parameters for MPN : TCA39306DCUR