DP83826AE: Register setting

Kunihiko Ogawa

Part Number: DP83826AE

How do I set the bit0-7 for MISR1 register on DP82826Ax to enable interrupt.

0 Gregory Kobyakov 4 hours ago

Hi Ogawa-san,

These are set via MDIO register writes. Writing 1 to the bits 0-7 in register 0x12 (MiSR1) enables the corresponding interrupt.

Best regards,

Greg

0 Kunihiko Ogawa 3 hours ago

Thank you Greg,

My problem was solved.

Best regards,

Kunihiko

Interface forum