TPS62869EVM-118: GUI interface of theTMP62869 cannot be connected

Part Number: TPS62869EVM-118
Other Parts Discussed in Thread: TPS62869, USB2ANY,

Hi, previously the USB2ANY module is working fine with the I2C wire connections to the target TPS62869 DCDC chip.  However, I saw there is a Software for USB2ANY explorer and loaded the software.  The software requested a older 2.7.0.0 FW to be downloaded. So my previous FW get overwritten and I forgot what is the version and also can't find from TI website.  Question, can this 2.7.0.0 use. I managed to see the GUI but the I2C like can't get the data so cannot be connected. Please helpTPS62869_customer support for GUIand FW.JPG

  • Hello BG,

    thanks for reaching out in E2E.

    Probably you used the SLVC622 — USB2ANY Explorer Installer v2.7.0.0. You should rather use latest version. Currently this is the SLVC695 — USB2ANY Explorer Software from the USB2ANY interface adapter webpage.

    Unplug the TPS62869EVM-118 board from the USB2ANY adapter before starting the firmware update process.

    Plug the USB2ANY directly into your PC via USB (keep it disconnected from the target EVM).

    Open the USB2ANY Explorer on your computer.

    If the software automatically detects the adapter and prompts you that a firmware update is required, follow the on-screen instructions. The recommended firmware version should be v2.8.2.0.

    Once the flash process completes, close the USB2ANY Explorer on your computer, unplug the USB2ANY, reconnect it normally, and then attach your TPS62869EVM-118. Finally start the GUI interface of theTMP62869EVM-118.

    Please let me know if this solved the problem.

    Best regards,

    Andreas.

  • Thank you so much. Issue resolved.

  • Hello,

    thanks a lot for your feedback.

    I would be more than happy if you would click the green “This Resolved My Issue” button.

    Best regards,

    Andreas.