Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed the week of November 23.

TCA9555: I2C faster falling and rising time

Part Number: TCA9555

hi there,

  I'd like to confirm I2C min. time spec. of Ticf and Tocf on 400KHz mode. 

Shown below is customer spec. and test result. we find Ticf and Tocf results (4.6ns) < spec. (12ns) at 3.3Vcc.

  what's the impact if they're less than min. time? is min. time required to meet?

 

TCA9555 I2C.png

  • Hi Alan,

    Sorry for the late reply. 

    Fall time spec in the I2C standard seems to be mainly for undershoots. A faster fall time usually means a strong driver, and more susceptible to undershoots in environments where inductive and capacitive parasitics are present. 

    This fall time should be okay for this I/O expander. 

    Regards,

    Tyler