Receiver end of the SN65LVDS93A

PaulSchoenke

Other Parts Discussed in Thread: SN65LVDS93A

Hello,

I need an industrial temperature flat-link receiver that has 4 serial receiver channels and 28 parallel outputs. The receiver would be used with SN65LVDS93A transmitter.

Also, the clock needs to go down to 10 MHz. Does any part exist?

Any feedback or input is welcomed and appreciated!

Thanks again and best regards,

Paul

over 13 years ago

0 RE over 13 years ago

TI__Mastermind 20985 points

Hi Paul, we don't currently have this device, but it is on our roadmap. When do you need samples, and when are you looking to go to production? If you'd like, you can email me directly at reisenbeis <at> ti <dotcom>.

Thanks,
RE

0 PaulSchoenke over 13 years ago in reply to RE

Genius 3290 points

We would want these in early May 2012 to put on boards to get into our reliability testing for June 2012.

When is it on TIs roadmap? Probably won’t have these ready. This sounds too risky for the product schedule....

0 RE over 13 years ago in reply to PaulSchoenke

TI__Mastermind 20985 points

That's right, our new device schedule is definitely later than June.

Interface

Interface forum

Receiver end of the SN65LVDS93A