TPD1E10B09 Pin 1,2 Markings

Ryan Andrews

Other Parts Discussed in Thread: TPD1E10B09

Hi Team,

Can you please help me confirm the part placement orientation/polarity for the TPD1E10B09? Are there any markings on the part to designate pin # 1 vs pin # 2 ?

The customer and I do not see anything definitive mentioned in the datasheets to indicate how to determine pin #s; however, they have noticed a white band across the part, does this indicate Pin 1??

Thanks in advance for your guidance.

Best Regards,

Ryan Andrews - ACAT

over 13 years ago

0 Vivek Shankar over 13 years ago

TI__Intellectual 2520 points

Yes that is corect. The White band indicates PIN 1.

0 Ryan Andrews over 13 years ago in reply to Vivek Shankar

TI__Guru 67206 points

Thank you, Vivek!

Ryan

0 LeonardEllis over 12 years ago in reply to Vivek Shankar

TI__Guru 71526 points

This question comes up over and over. Please update the datasheet and/or the DPY document to reflect this information . .. much time is wasted not having this info available to the general world. Thank you!

-Leonard

0 Vivek Shankar over 12 years ago in reply to LeonardEllis

TI__Intellectual 2520 points

Leonard,

I will change the datasheet. This typically takes up to one week. Thanks for the feedback.

Vivek

Interface

Interface forum

TPD1E10B09 Pin 1,2 Markings