Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 562 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS40MB200 power at lower data rates

Barry Allred
Prodigy 40 points
Other Parts Discussed in Thread: DS40MB200

I am looking at the DS40MB200 at a 3.125Gpbs data rate.  The datasheet only provides power at the max data rate.  Does the power decrease significantly with data rate? 


Thanks,
Barry

  • 0
    TI__Expert 5175 points

    Greetings -

    This is a current mode CML based part, current consumption is more or less fixed, it does not greatly increase or decrease over frequency.  Note there is a MIN data rate for the part and also DC balanced data is required as well.

    Best Regards;

    John Goldie