TUSB3410 driver for Windows 8 64 bit

Rick Ward

Other Parts Discussed in Thread: TUSB3410

Hi,

I need a driver (TUSB3410) for a Superflow flowbench with Wincom using Windows 8 (64 BIT).

Superflow sent me one for Windows 7 (64 bit) saying none of their other customers have been able to make it work but give it a try. They are right it didnt work for me either.

Can you help?

Thanks, Rick

over 12 years ago

0 Diego Cortes over 12 years ago

TI__Mastermind 36085 points

Hi Rick,

Here you go the TUSB3410 driver for win8 (x86 and x64)

Note:this driver is only for win8 5504.TI_WDF_USBUART_SINGLE_DRIVER_V6.7.1_Win8_Installer_WHQL.zip

0 Rick Ward over 12 years ago in reply to Diego Cortes

Prodigy 20 points

Hi Diego,

Thank you, It seems to load, but I am still having problems. I will let you know what I come up with.

Thanks, Rick

0 Kevin Gertgen over 12 years ago in reply to Diego Cortes

Prodigy 110 points

Rick sent me this link. I write software to interface to the SuperFlow electronics. Can you send a link to a driver for your chip for Win 7 64 bit? or maybe a general page which has USB-Serial drivers for many operating systems?

0 Sean Casserly over 12 years ago in reply to Diego Cortes

TI__Prodigy 455 points

Diego,

Do you know where I could be able to find a Windows 8, 32 bit driver for the TUSB3410? Any help would be greatly appreciated.

Thanks a lot,

Sean

0 Diego Cortes over 12 years ago in reply to Sean Casserly

TI__Mastermind 36085 points

Hello Sean,

The link I post bellow is for both Windows 8 versions (32bit and 64bit)

Regards,

Diego.

Interface

Interface forum

TUSB3410 driver for Windows 8 64 bit