TUSB1210 ULPI Jitter Spec (Integration Interval)

Wayne Fite

Intellectual 1945 points

Would like to clarify on the input integrated jitter (total jitter) is referring to any specific jitter such as TIE, Period or Period to Period jitter ?

Also: What it the frequency range for the integration of the jitter requirement?

over 12 years ago

0 pdjuandi over 12 years ago

TI__Mastermind 29755 points

These are Time Interval Jitters with jitter per band up to 1MHz. range.

0 AndMan over 12 years ago in reply to pdjuandi

Intellectual 335 points

Just to confirm, is this then equivalent to the "period jitter (RMS)" typically specified on oscillator datasheets?

Thanks - Andrew

0 Diego Cortes over 10 years ago in reply to AndMan

TI__Mastermind 36085 points

Hello ANdrew,

It is the same as the total Jitter (Tj).

Best regards,
Diego.

Interface

Interface forum

TUSB1210 ULPI Jitter Spec (Integration Interval)