• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 33 subscribers
  • Views 520 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1310A application

Chen Bogey8
Mastermind 9990 points
Other Parts Discussed in Thread: TUSB1310A

Dear Sir

Good days,

Here want use TUSB1310A in USB3.0 Host side with FPGA(Xilink) chip. May we check if there have any reference design info can suggestion?

Or more detial TUSB1310A spec and application note to us for reference.(we already search in TI website.)

                                Best regards,

                                                 Bogey

 

 

  • 0
    TI__Guru* 76130 points

    Hello,

    Have you seen the Implementation Guide?

    It is available at http://www.ti.com/litv/pdf/sllu123

    I can send you a reference schematic by email.

    Regards.

  • 0 in reply to Elias Villegas M.
    Mastermind 9990 points

    Dear Sir

    Good days,

    Pls share the reference design for us for reference.

    My mail address is Bogey.Chen@Avnet.com.

    By the way my customer plan use in copy machine. may you have other customer use in this kind application?

                                                         Best regards,

                                                                            Bogey

     

  • 0 in reply to Elias Villegas M.
    Prodigy 20 points

    Hi Elias,

    We are building a Dual LPC FMC daughter card with the TUSB1310A for use with Xilinx ZC702 development boards. We have poured over both the data sheet and the implementation guide. We would love to have an example schematic to check our design against before we have the boards built. Would you send it to us?

    In addition, we have some questions.

    1. values for strapping resistors

    2. crystal or external osc? 

    3. What Freq for crystal or osc?

    4. If external OSC is spread spectrum still generated in the chip?

    Thanks

    Phil Tharp

    Adapt IP Inc.