• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 34 subscribers
  • Views 1007 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDMI 1.4 Receiver Side ESD Protection

Chang-woo YANG
Expert 1285 points
Other Parts Discussed in Thread: TPD12S520

Hello~

I'm searching HDMI 1.4 Receiver Side ESD Protection device, but I cannot find the suitable device.

As I think that TPD12S520 is just support HDMI 1.3, and so I think TPD12S520 is not right device.

Would you please advise to me??

Thanks... C.W. :)

  • 0
    TI__Genius 12190 points

    Hello C.W.,

    TPD12S520 does support the HDMI 1.4. This device was released just prior to HDMI 1.4 is the reason it states 1.3 compliance. Thanks for bringing this oversight to my attention, I will see that the website and datasheet are updated accordingly. Is there anything else I can help with?

    Regards,

    Guy Yater

     Application Engineer, Integrated Protection Devices, Texas Instruments

  • 0 in reply to Guy Yater
    TI__Intellectual 1165 points

    Hi Guy,

    Can you provide an update on when the new datasheet will be available?  I just had another customer ask this exact same question today.

    Thanks,

    Jason