• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Reference schemmatic and/or design for the DS125RT410SQE/NOPB

Edward Sayre
Prodigy 45 points
Other Parts Discussed in Thread: DS110DF410

Is there a reference schemmatic and/or design for the DS125RT410SQE/NOPB?

  • 0
    TI__Genius 13475 points

    Edward

    Take a look at the documentation for the evaluation kit for a similar product, the DS110DF410 - available here: http://www.ti.com/lit/ug/snlu126/snlu126.pdf

    That may provide you what you are looking for.

    Mark

     

  • 0 in reply to Mark Sauerwald88474
    Prodigy 45 points

    Is the register set the same and can the same software be used?  What language is the software written in?  Is the source code available? What operating system does it run under?  (I didn't get a chance to read the user's guide but I scanned the software section.)

    Can the program be converted to MatLab which seems to be a very common tool in Gigabit serial communications.

    How much is the development reference board and where is  it available from?

    BTW, about 7 years ago I played a role in certain early 3.125 Gbps designs with TI personnel - Bob Kaminsky and Kim Hayes.  I understand that Kim has retired but I lost track of Bob. Send me your contact information so I can describe what I am doing.

     

    Ed