LMH0366/LMH0376 Jitter Transfer and Jitter Tolerance

Kobayashi-san

Please contact me off the forum at mark.sauerwald@ti.com to resolve this issue.

Mark Sauerwald

 

Kobayashi-San,

Please let me know if this is LMH0366 or LMH0376?

Regards,,nasser

Mark-san, thank you for your reply. I'll send a mail to you.

Nasser-san, thank you for your support. Cusotmer will use LMH0366, so I need a LMH0366 result. Well, I think that the characteristic of PLL is the same as "0366 in '0376, correct ?

Last year, I've received a Jitter transfer VS CP current plot with 0.2UI input jitter. Well, Other customer want to see a same plot with 3UI input jitter. Do you have a jitter transfer data with 3UI input jitter ?

Kobayashi-San,

 Normally or it is a general practice that we use 0.2UI of jitter to measure the loop bandwidth. All of our reclockers use 0.2UI of input jitter for jitter transfer measurement. We have not done this measurement using 3UI of jitter. Please note as you increase the input jitter the loop bandwidth decreases.

Regards,,nasser