• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 255 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS100DF410 : better channel combination when customer use only two channels

Hiroshi Kezuka
Intellectual 2410 points
Other Parts Discussed in Thread: DS100DF410

Dear team,

 Customer use only 2 channel of DS100DF410. Then customer asked us is there better channel combination to improve performance when customer use only 2 channel(ex. ch0 and ch3).

 I think it is better to use ch0 and ch3, and power down ch1 and ch2.
 Is my understand correct?

Regards,
 Hiroshi Kezuka

  • 0
    TI__Guru* 93670 points

    Hi Kezuka-San,

    Device is designed to have optimum separation between the channels. As such, there should not be any cross talk between the adjcent channels. But if only two channels are used we recommend using the two other channels as you described to allow even more separation.

    Regards,,nasser