DS100DF410 : better channel combination when customer use only two channels

Hiroshi Kezuka

Other Parts Discussed in Thread: DS100DF410

Dear team,

Customer use only 2 channel of DS100DF410. Then customer asked us is there better channel combination to improve performance when customer use only 2 channel(ex. ch0 and ch3).

I think it is better to use ch0 and ch3, and power down ch1 and ch2.
Is my understand correct?

Regards,
Hiroshi Kezuka

over 12 years ago

0 Nasser Mohammadi over 12 years ago

TI__Guru* 93570 points

Hi Kezuka-San,

Device is designed to have optimum separation between the channels. As such, there should not be any cross talk between the adjcent channels. But if only two channels are used we recommend using the two other channels as you described to allow even more separation.

Regards,,nasser

Interface

Interface forum

DS100DF410 : better channel combination when customer use only two channels